Ventilation

DANHEAT has a wide range off ventilation systems

Ventilation in generel

in an execution to fit your design, needs and purpose.

  • for air amounts up to 50.000 cbm/h
  • for very poluted gasses
  • for special pressure conditions
  • for large output pressure
  • for indirectly and directly heating
  • in special building measures
  • delivered with electroplated cover plates
  • ventilation systems built in sections, if the access conditions are poor

 

with controls for all types of ventilation systems.

  • for need controlled ventilation
  • for variable inlet temperature
  • where ventilation systems are connected to other machines

 

with accessories, which matches the actual system

  • sound reducer locks
  • air mixing cabinets
  • air damper

 

DANHEAT is willing to help you dimentioning the ventilation system.
We are willing to help, whether we speak about new systems or modifying existing systems.

varmegenvinding

Heat Exchanger type KVV 04-15

DANHEAT heat exchanger type KVV 04-15 is a series of heat exchangers mounted with Water coil.

The exchangers are mounted with the following:

Airflap for air-inlet with servomotor.
Pocket filter KS 05 for supply air, cleaning gates for filter inspection.
Pocket filter KS 05 for air-outlet, cleaning gates for filter inspection.
Fan and motor for both air-inlet and air-outlet.
Air heat exchanger produces in aluminium – all with an efficiency better than 65 %.
Underneath the heat exchangers air-inlet side is mounted a tray with drain for condensation water.
The exchanger is mounted in a cabinet made of galvanised steel plate. All cover plates are galvanised and isolated with 15 mm mineral wool.
The coil is made of copper pipes with aluminated cooling ledges.
The coil is as a standard set for warm water 70/30gr C. Max operaton pressure 4 bar.
Electrical control for the exchanger is offered according to customer specifications.

Tecnical information

Tabeller_regneark_59 (1)

Product sketch

35675_KVVstd

Low noise level

High efficience

Simple and service friendly

Heat Exchanger type KVG 04-15

DANHEAT exchanger type KVG 04-15 is a series of heat exchangers mounted with oil or gas burner for supply heat.

This combines the heat exchangers energy profit with the advantages by an air heater, no freezing risk and extremely fast energy transmission.

The heat exchanger is mounted with the following:

Airflap for air-inlet with servomotor.
Pocket filter KS 05 for supply air, cleaning gates for filter inspection.
Pocket filter KS 05 for air-outlet, cleaning gates for filter inspection.
Fan and motor for both air-inlet and air-outlet.
Air heat exchanger made of aluminium – all with an efficiency better than 65%.
Underneath the heat exchangers air-inlet side, there is mounted a tray with drain for condensation water.
Heat exchanger for oil– or gasheating, the heat exchanger is in a welded construction and made out of stainless steel.

The exchanger is mounted in a cabinet made of galvanised steel plate. All cover plates are galvanised and isolated with 15 mm mineral wool.
Type KVG 04 – 05 is mounted with on/off oil– or gas burner.
Type KVG 08 – 15 is mounted with high/low oil burner or modulating gas burner.
Electrical control for the exchanger is offered according to customer specifications.

varmegenvinding
Tecnical information

Type KVG

L1

L2

H1

H2

D

Ø1-4

Ø5

04 - 05

2620

1050

1400

760

760

500

155

08 - 10

3300

1200

2040

1060

1060

630

155

12 - 15

4150

1400

2780

1360

1460

800

187

35697_Tabeller_regneark

Product sketch

35695_KVGstd

 

Low noise level

High efficience

Simple and service friendly

35726_52582_LUFO_00274

Heat Exchanger LUFO/Recuperator

En varmeveksler, hvor varmen nyttiggøres fra forbrændingsprodukter.

Er velegnet for: Effektiv nedkøling eller varmegenvinding ved høje temperaturer på afkastluften.

Funktion
Danheat recuperator: Effektiv varmegenvinding ved høje temperaturer.

En recuperator benyttes, hvor der ønskes varmegenvinding / nedkøling ved høje temperaturer på afkastluften f.eks. røggasser, afkastluft fra hærdeovne, glasindustri eller tørreprocesser.

Recuperatoren kan fungere som luftforvarmer (LUFO) for forbrændingsluft eller den opvarmede luft kan indgå i eventuel tørreproces.

LUFO fremstilles fra 50 – 2.000 kubik meter i timen og kan, alt efter formål, benyttes til afkastluft temperaturer op til 900oC.

LUFO er på afkastluft siden meget nem rengøre, enten mekanisk eller med væske og kan derfor benyttes til stærkt forurenet luft.

Virknings graden er typisk udlagt for 70% og tryktab er meget lille 1 – 1,5 mbar.

Recuperatoren er monteret i et isoleret kabinet. Udvendig beklædningsplader kan efter ønske udføres i galvaniseret stålplade eller rustfri stålplader.

Teknisk information

35727_LUFO_20tegning